A woman sitting in a café, frowning slightly at her phone.

Your flipbook may be hurting your magazine. Members open it on their phones, pinch to read the first page, and close it before the second article. Open rates on the issue email are sliding, and clicks on the flipbook drop a little every quarter.

None of that is a verdict on the writing. The features are as strong as they’ve ever been. What’s changed is how a member gets to them. To read your magazine today, someone has to know it exists, click out to a separate site, and want the magazine specifically. Almost nobody arrives that way anymore. They arrive looking for a topic. They search your website for “workforce shortage,” or they type it into Google, and whatever comes back is what the association has to say on the subject. If the 2,000-word feature you ran on it last spring isn’t in that list, then as far as the member is concerned, you never wrote it.

Nearly half of associations say communicating member benefits is one of their biggest challenges this year (that figure, and the others in this post, come from Naylor’s 2026 Association Benchmarking Report). The magazine is one of the most tangible benefits you offer, and right now it’s filed where members don’t look. Three changes fix that, and the order matters: first where the magazine lives, then how it reads on a screen, and only then what it earns.

Bring the magazine onto your website

Most flipbook platforms have gotten better. The newer ones will separate an article from the issue, give it a link, and let a reader search within the magazine. That solves one problem. It leaves the bigger one in place: the magazine lives somewhere else. It’s usually on a separate domain, with its own search bar, cut off from everything else your association publishes. A member who searches your website for “workforce shortage” gets the webinar and the blog post. They don’t necessarily get the 2,000-word feature, because it isn’t on your website. Google sees the same thing you’d see: two sites, no connection between them, and your best work on the one that isn’t yours.

The fix is to bring the magazine home. Each feature article gets a page on your own website, filed next to the webinar you ran on the same topic and linked to the blog post from last spring, so a member who lands on any one of them can find the other two. That’s the version of the article a board member will forward, and the version your site search can return. The website is the second-most-valued engagement tool in the sector, behind only email. Right now your best writing isn’t on it.

The archive can wait. Start with one article, the best one in your last issue, and post it on your site the way you’d post a news item. Then in the next member email, link to that page where you’d normally link to the flipbook. If the clicks come in higher than the previous issue’s flipbook link, you’ve got a number, and a number is what you’ll need when you take this to the vendor who lays out the magazine or the web team that owns the CMS. Both of them are going to ask why. Now you have an answer that isn’t “because I read it somewhere.”

Build your digital magazine for a screen

Open your last issue on your phone. The flipbook shows one page at a time, which sounds fine until you notice the whole page is the width of your screen and the body copy is the size of a grain of rice. So you zoom in on the first column, read to the bottom, and scroll back up to find column two. Most readers do that once. Then they go back to their email. The desktop version has the opposite problem: a print page sitting in the middle of a wide monitor with empty space on both sides.

Building for the phone first is mostly a writing discipline. Paragraphs get shorter. Subheads show up every few hundred words so a skimmer can find their way back in. Images need to hold up at a single column. Captions do more work, because on mobile the caption often loads before the photo. Once a piece reads well at that width, flowing it into print is the easier direction, though if an outside designer lays out the print issue, the order of operations is something you’ll need to agree on with them.

Once the piece is built for a screen, the photo shoot stops being the only visual. You were already going to interview the member running that company, and you were already sending a photographer. Put a phone on a tripod beside the photographer and record ten minutes of the conversation. The feature runs with a short clip, and the clip gets shared on its own by people who’ll never open the full article. This is where the sector has moved fastest: the share of associations publishing video more than ten times a month went from about 3% to nearly 25% in a year.

Don’t leave your sponsors in the flipbook

If the issue stops being a flipbook, what happens to the full-page ad on the inside cover? The honest answer is that full-page ads don’t translate. Most of the rest of your inventory does, and some of it does better.

A print ad can’t tell a sponsor who saw it. The only number print has ever been able to offer is circulation, so that’s the number everyone has worked with, sponsors included. It counts copies mailed. It can’t count copies opened. That matters when the digital edition launches and article views come in well below the mailing list, because the obvious conclusion is that interest has fallen. It may not have. Digital may be the first time the magazine has been measured by readers rather than by copies, and the number may have been where it is now all along.

That same measurement is what makes a digital placement worth more to a sponsor than a print one. It can show how many people opened the article the ad ran beside, how many clicked, and which issue did better. Advertisers have been asking for that for years, and the lack of it is showing up in the sector’s results. Sponsorship’s share of non-dues revenue dropped from 29.7% to 25.3% this year, and more than a quarter of associations pointed to one of two barriers: fragmented ad inventory, or no data to prove ROI.

The rate card is the easy part. A full page becomes a feature sponsorship, usually a banner plus a placement inside the article. A half page becomes a single inline unit. Put an expected impression count beside each one and the card is done in an afternoon.

The harder part is the advertiser who has bought the inside front cover for ten years. What they want from you isn’t a new product. It’s proof that someone saw the old one, and print has never been able to give them that. Most will keep the print placement for a renewal cycle or two while they watch what the digital numbers do. Some won’t move at all. The ones who’ve been quietly cutting their spend each year are the ones worth calling first, because a click count is the thing they’ve been missing, and nobody else selling them print inventory can show it to them either.

Where to start

The flipbook was never the problem on its own. It was the only place the magazine lived, and members stopped looking there.

TAPPI had the same setup a year ago: two magazines, a journal, newsletters, podcasts, and years of event video, each in its own corner. On November 18, Jana Jensen from TAPPI walked through how they brought about 7,200 pieces of it onto one site, what members did once it was there, and what she’d do differently next time. Ben Hopper from Naylor brought the benchmarking data behind the numbers above, and Dan Stevens from TaleWind talked through how to spot the same gaps on your own site.

You can watch the replay HERE.

If you’d rather start with a quick read on your own site, the Member Value Scorecard takes about three minutes. The Experience score answers the question in this post’s title.